Brink Air 70

Decentral ventilation
The Air 70 is a decentral heat recovery ventilation appliance (HRV). The appliance is very easily installed on an exterior wall. The ventilation air is supplied and discharged straight through the exterior wall. No ducts system required.

Design
The compact appliance hood on the inside of the wall is of a slim, unobtrusive design. You can paint the Air 70 in any colour you desire, just follow the instructions. That makes the Air 70 blend in with in any interior. There is a choice of grilles in various colours for the façade.

​

Silent and low-energy
With its sophisticated technology, the Brink Air 70 is a very silent decentral ventilation appliance. On top of that, the energy consumption of the appliance is very low. The fresh supply air is guided through the built-in tube heat exchanger where it is preheated by the stale and warm air that is exhausted from the space. That results inadequate ventilation with hardly any heat losses.

​

100% bypass
In summer, the appliance uses the cooler night air. No need to open a window, the 100% bypass will be activated automatically. That makes the home more comfortable and it keeps out the noise, but the vermin as well.

​

Frost protection
The thermal efficiency will not be affected by low outdoor temperatures. The built-in preheater prevents the heat exchanger from freezing and ensures that the airflow through the Brink Air 70 is maintained.

​

Small size, great power
The Brink Air 70 is a compact decentral ventilation appliance. Its ventilation capacity is high: up to 70 m3/h, while the diameter of the duct in the exterior wall is still very small (Ø 250 mm). Moreover, the appliance fully complies with the European regulations (EN 13141-8).